MODULAR OPERATION THEATER
At Gandharv Engg. & Medical System we consider minute details and needs before installing our advanced electrical equipment, remarkable medical gas system, and exquisite lighting gears. An operation theatre has chances of extension in the future and hence should have a scope of introduction of new technology or a new facility. We being the leading modular OT manufacturer and supplier, therefore, keep provisions of extension. Our modular operation theatre is well equipped to perpetuate the essential sterilized surroundings with an exceptional laminar airflow system.
PRE-FABRICATED MODULAR OPERATION THEATRE PANELS WITH ANTIBACTERIAL PAINTING
The wall, Sloping and ceiling panel can be made out of following material as per customer requirement.
a) 1.6mm thick EGP steer panels backed by 12mm thick Gypsum,
b) Stainless steel SS304 panels,
c) High-pressure Laminate panels as per EN standard,
d) PUF sandwiched panel.
Pre-fabricated operating room shall be designed and constructed for exact size. Stainless EGP sheet walls, sloping and ceiling panels shall be backed by gypsum board to provide seamless operating room. The external walls of the room are constructed with solid brick and mortar and in hospital scope of work. The inner surface walls shall be constructed with at least 1.6 mm thick EGP sheets backed by 12mm gypsum board. The inner surface walls shall be fixed to the brick wall with essential supports. There shall be minimum possible cavity / gap in between the solid and steel walls. The total distance between inside and outside surfaces of OR shall be variable to suit architects’ layout, but shall be sufficient for flush mounting of the equipment’s. The individual wall panels shall be spot welded together at equal intervals to render equal support to panels. Spot welding shall be properly grinded to make surface levelled. All joints shall be filled with metal filler and sanded flush on site, ready to receive plastic finish. The cavity between inner and outer walls shall be left with minimum obstructions for possible addition of equipment at a later date and to enable services, pipes, conduits etc., to be run within the cavity.
Kay Features:
•Joint less sealed structure
•Better Light & air distribution
•To provide smooth and uniform surface
•High standard of construction
•Complete design, installation and maintenance service.
Filling of all joints and cavities with Metallic Epoxy filler and sanded flush to provide a joint less finish and then sprayed with a water based liquid plastic aseptic and self-sterilizing wall coating to a depth of 300 microns with primer to provide totally sealed and seamless surface which is non-pours, easy to clean, stain resistant, durable and does not support growth of mold, mildew or bacteria.
The wall, Sloping and ceiling panel can be made out of following material as per customer requirement.
- 6mm thick EGP steer panels backed by 12mm thick Gypsum,
- Stainless steel SS304 panels,
- High-pressure Laminate panels as per EN standard,
- PUF sandwiched panel.
Pre-fabricated operating room shall be designed and constructed for exact size. Stainless EGP sheet walls, sloping and ceiling panels shall be backed by gypsum board to provide seamless operating room. The external walls of the room are constructed with solid brick and mortar and in hospital scope of work. The inner surface walls shall be constructed with at least 1.6 mm thick EGP sheets backed by 12mm gypsum board. The inner surface walls shall be fixed to the brick wall with essential supports. There shall be minimum possible cavity / gap in between the solid and steel walls. The total distance between inside and outside surfaces of OR shall be variable to suit architects’ layout, but shall be sufficient for flush mounting of the equipment’s. The individual wall panels shall be spot welded together at equal intervals to render equal support to panels. Spot welding shall be properly grinded to make surface levelled. All joints shall be filled with metal filler and sanded flush on site, ready to receive plastic finish. The cavity between inner and outer walls shall be left with minimum obstructions for possible addition of equipment at a later date and to enable services, pipes, conduits etc., to be run within the cavity.
Kay Features:
- Joint less sealed structure
- Better Light & air distribution
- To provide smooth and uniform surface
- High standard of construction
Complete design, installation and maintenance service
Get in touch
Want to elevate your brand experience?
Just bring your creative business idea or the communication problem. Let’s solve them together. We help businesses Improve their Digital Presence.